Archive for the ‘Lighting Problems’ Category

Tips for Setting Up Your Outdoor Motion Sensor Lights

A few good tips for setting up your outdoor motion sensor lights will help you to avoid some of the most common errors when placing and adjusting your motion sensor units. Safety and security are two very good reasons to install motion detector lights. They will help you get into your home when arriving after dark and give you a sense of security when you’re sleeping. This kind of comfort truly is priceless so all things considered, motion detectors are a really good investment.

Motion detector lighting can be used to illuminate a walkway or driveway. It can turn on lights either inside or outside. Installing Outdoor LightThey can deter a potential intruder who may be looking for an easy mark. If your home lights up like a Christmas tree when someone approaches, its most likely the culprit will just move on to an easier mark. Safety comes when there’s no need to get out of your car in the dark. Your approach is well lit and falls can be eliminated especially in inclement weather when slippery conditions exist. Installing motion detector lighting solves several problems with one easy fix.

 

Where To Install Motion Detector Lighting

Automatic lighting is normally used to illuminate a drive or walkway. Some will use this type of apparatus to light up a back yard. Other uses include turning on interior lights when dusk arrives. This application will give the appearance that someone is home when in fact you may be away on vacation or just out for an evening. Whatever the reason for your lighting here are a few easy tips for setting up your outdoor motion sensor lights.

Start by surveying just what you need to light up. Some will need a wide beam of light to include an entire backyard for example. Others will want a narrow long beam for lighting a walkway. Driveways may require a flood light and still another type would be a wall hung sconce light for walks and entrance ways.

Your lighting apparatus will have several adjustments that must be taken into consideration when purchasing the units. You’ll need to have some sort of plan laid out on paper and a list of how many lights and where they will be located. Another question to think about will be whether or not the unit will contain the sensor that operates it or will you need a remote sensor. The proper positioning of the sensor is imperative to a good functioning motion detector lighting system. Set up your lighting and place the sensors at their highest settings. Use the test switch to operate the lights during daylight hours. This will allow you to get the settings close enough to come out and fine tune everything when it’s dark. Almost all units have adjustable timers. Normally they can be adjusted from one minute to twenty minutes or more. Figure out how long it takes you to get to where you no longer need light from when you trigger the motion detector and that should be your setting.

If you have problems with your units picking up motion from a source you don’t want them to see, such as traffic going by or even trees blowing in the wind that can sometimes effect the operation. There are tricks to help like placing a small piece of tape over the very edge of the sensor’s eye. This can reduce the peripheral vision of the unit and block out say, road traffic or a flag waving in the vision field. This can also be accomplished with a black Sharpie to a fine degree. If you have exterior lighting that isn’t under an eave or somehow protected from the elements. Make sure these light fixtures are facing down. Although most units for exterior lighting are supposed to be sealed from the weather, there is a potential problem if they are tipped up and water collects in the socket.

These tips for setting up your outdoor motion sensor lights will hopefully get you the safety and peaceful nights you’re looking for from this type of a system. Your security matters and motion lights can help in a variety of ways.

Motion Sensor Light too Sensitive

Many people run into the problem of having there motion light sensor being too sensitive. Sometimes this issue can be resolved with nothing more then a good cleaning. Take a clean cotton cloth and use acetone to wipe down the electric eye or sensor. While you’re at it clean the surface of the light as well. Think about the location of your unit and the range of vision within the eyes scope. Is there a street nearby that could be visible within the peripheral vision of your motion sensor light? A lot of the time we underestimate the range of radar, which is the science behind the technology that makes a motion sensor work.

A good tip for limiting unwanted motion being picked up is to use electrical tape or some other type of tape and tape theOutdoor Motion light sides of the sensor so the area to be avoided is removed from the unit’s field of vision so to speak. This can be good if there’s a public sidewalk near your home to avoid setting it off when people walk by. You may ultimately have to relocate the sensor for some applications. Units are available with remote sensors that can be placed away from the actual lighting unit. This may be an answer for long walks or driveways. They can be used to illuminate the drive as you enter and control lights all the way to your door.

One other rather drastic trick is to use a can of black spay paint and fog the sensor. Use a short blast far in front of the unit until it’s barely visible on the lens. try the light out and add another dusting if it’s still too sensitive. This is a trial and error method and may not work for all units.

Resetting the unit will sometimes help to get your lights back to the default settings. There is usually a test or reset button somewhere on the light. Press the button and then try out your lights again. If your lights are not coming on make sure to check any breakers at the power source as well. If your lights are located in an unprotected exterior location then it’s a possibility that water has gotten into the unit. It’s recommended that you replace the unit with a new one, instead of trying to repair it. There is a potential for a fire risk and personal injury or property damage could be caused by a defective or damaged motion sensor light.

Most of these units are made very inexpensively and getting a good one means buying the top of the line. Sometimes an electrical surge can be the culprit of a faulty sensor. Too much power can overload the tiny circuitry used with motion sensor lights. If this is the case, fifty percent of the time it will pop the reset. The rest of the time it can burn the connections and cause the sensor to have false readings.

If all else fails with motion sensor lights too sensitive, you’ll need to replace your outdoor motion sensor lights. Fortunately they are relatively inexpensive and well worth the comfort they add to your life. Security safety and a good night’s sleep don’t usually come in this cheap of a package.

Here Are A Few More Articles That May Help

Best Wireless Motion Sensor Lights

Best Solar Motion Sensor Lights

Decorative Motion Sensor Lights